Meat storage refrigerator trucks

  • >=1 Sets
    $18,571.00
Model Number:
LC-01
Report Suspicious Activity
Overview
Quick Details
Brand Name:
IKOM
Model:
LC-01
Place of Origin:
China
Transmission Type:
Automatic
Condition:
New
Box Dimensions (L x W x H) (mm):
7200*2440*2400mm
dimension:
7200*2440*2400mm
Supply Ability
Supply Ability:
10 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
nude, spraying wax on the appaerance
Port
SHANGHAI
Product Description


Cold model
Cold model
Carrier C700
Thermo King SV800
Refrigerating capacity (W)
0℃/30℃
6550
7500
-20℃/30℃
3490
4000
Condenser weight (KG)

42
50
Evaporator weight (KG)

35
31
Related Products

Chip Sealer ZQZ5250TFC

Surfacing & Slurry Micro Paver

Mechanical Tire Type Asphalt Paver

Intelligentized Asphalt Distributor

Manual Asphalt Distributor

Chipping Spreader

Detailed Images
1.The box body has the following characteristics:
a. When designing and making the insulation compartment, refer to the relevant sealing and insulation requirements of gb29753-2013 "safety requirements and test methods for refrigerated trucks for road transportation of food and biological products". The technical requirements of this roof can effectively prevent the deterioration of meat products in outdoor areas in summer due to the temperature rise in the sunshine radiation compartment.
b. The steel welded skeleton is embedded in the interior of the box body heat preservation board, and the steel skeleton is embedded in the interior of the roof heat preservation board.During the final assembly of the box body, the skeleton of the side plate and the skeleton of the roof form a gantry structure, which is used to support the weight of the products in the box. The rear door frame of the box is strengthened to prevent the box from collapsing.
2.Box forming process
Front, side and top plate: each plate is composed of inner and outer cabin plate and heat insulation and flame retardant layer.The outer shell plate is made of 2mm thick glass steel plate (good strength and corrosion resistance), the heat insulation and flame retardant layer is made of extruded polystyrene plate with a density of 35 ~ 40 (kg/m3), and the outer shell plate is made of 2mm thick glass steel plate. The thickness of the roof is 100mm. The thickness of the rest is 80mm.
The inner and outer panels, the heat insulation layer and the plywood frame are bonded to each other by polyurethane structural adhesive through the vacuum platform under negative pressure to make independent plates. Meanwhile, the steel skeleton is embedded in the plate to ensure the plate strength.
Bottom plate: the bottom plate of rectangular aluminum guide rail is pasted with anticorrosive and waterproof plywood under the inner plate, and the outer plate is made of glass steel plate, and the middle is filled with a extruded polystyrene foam insulation layer. The insulation layer density of this part is 35 ~ 40 (kg/m). Embedded bottom plate is connected with reinforcing bar (integral welding frame) and square supporting wood to ensure the insulation performance and impact strength of the bottom plate.
3.Box back door process
Double back door and hardware as well as the design of the rear door frame: double back door panel frame adopts the overall frame structure, the door panel is filled with extruded polystyrene foam. Polyurethane structural adhesive is used to bond the foam with the frame and inner and outer skin. Double back door, side door hardware are all stainless steel polishing pieces; The use of plate stainless steel hinge, ensure that the double back door, side door free, flexible open; The rear door frame is made of 2mm thick stainless steel plate, and the rear door column is equipped with stainless steel handle for loading and unloading.
4.Hang the meat guide
According to the customer's requirements, the box is equipped with the corresponding quantity and the sliding track of the wing type. The sliding track is equipped with the stainless steel fixed hinge, and the standard stainless steel standard installation double hook. The specific quantity is according to the customer's requirements.
Certificate
Company Profile

 IKOM Construction Machinery, China Top 3 asphalt truck brand, located in Hangzhou,it is the subsidiary company of ZHUMA Construction Machinery Group, The ZHUMA passed the ISO9001:2000 international quality system certification and products 3C authentication, the products cover Chip sealer, Slurry sealer, Concrete paver, Asphalt finisher, Chipping spreader, Bitumen decanter, emulsion plant and 50 various models, and gradually realize the product standardization and serialization and industrialization.

Our engineer team has 20 years experiences focused on Asphalt machinery technology, and our brand footprints travel across 40 countries. IKOM is committed to offering high quality, reliable products and service on time

Your satisfaction is our commitment. Let us be your trusted partner.

Telephone: +86-571-88260773
Web: www.ikommachinery.cn

Customer Feedback
Global Service